home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
CATAGING
/
SCBABOTL.LZH
/
SCBABT14.EXE
/
HISTORY.DOC
< prev
next >
Wrap
Text File
|
1992-06-22
|
15KB
|
278 lines
SCBABOTL HISTORY
====================
REGISTERED UERS NOTE: To upgrade your current copy of the program, you only
need to copy the new SCBABOTL.EXE file into your SCBABOTL directory.
----------------------------------------------------------------------------
Version 1.4 June 22, 1992
----------- -------------
1. Optimized several of the search and look-up functions to help users
with lots of bottles (1000+).
2. The inventory list printing function now shows how many total pages will
be printed and which page is currently being printed. A "Press Esc to
stop printing" option has been added to several of the reports.
3. A new report has been added to the inventory. You can project future
costs for budget purposes by specifying two dates and an estimate of what
it costs to hydro test one bottle. The report will show all bottles due
for hydro between your two dates and also total up the cost. And for those
of you charged a different price dependent upon the bottle pressure or
capacity, there is a summary report showing how many bottles of each
pressure and duration there are. The program can handle up to nineteen
different combinations of pressure/duration. If you should have more than
nineteen different combinations, the rest are lumped together under the
"OTHER:" heading. The program assumes that a bottle that was last hydro'd
in February (for example) will need to be retested in February again,
rather than in January.
4. A new summary report has been added to the inventory. It simply scans
the entire inventory and tells you how many bottles of each pressure and
duration you have. The program can handle up to nineteen different
combinations of pressure/duration. If you should have more than nineteen
different combinations, the rest are lumped together under the "OTHER:"
heading. To keep the menu in a logical order, this report is now the first
selection. The rest of the reports are bumped down one letter.
5. A new option has been added to the Record Deletion Menu. It is now
possible to erase specific bottles from the SCBA inventory, selected
by their serial number. You can erase one bottle at a time. This option
was needed for users with several hundred bottles. Looking through the
inventory list bottle by bottle was a bit tedious (I'm told!).
6. The operation of the main menu 'D' (search the inventory by serial or
ID number) has been changed. Previously, it was only possible to edit a
select few fields from this screen. You can now change anything. This
change is applicable to both the SCBA bottle inventory and the PASS
unit inventory.
7. The method of updating the inventory bottles from the fill log has
changed. Previously, each bottle in the inventory was checked against
each bottle in the fill log. When a match was found for the serial
numbers, the information in the inventory was updated with the most
current info from the fill log. This worked well even on slow computers,
if the number of bottles in the fill log and inventory was no more than
a couple of hundred. Unfortunately, coupling large inventories and fill
logs with slow computers resulted in the "Please wait, updating the
inventory..." message staying on the screen for a half a minute or longer.
Now, the inventory bottles are updated at the same time the entries are
made into the fill log. Since the "short cut" data entry method for
adding your own bottles to the fill log had already located and verified
the matching serial number/i.d. number in the inventory, it took adding
about ten lines of code to the program to make the update at the same time.
Can't figure out why I didn't think of this before . . .
8. Corrected the problem with misaligned maintenance notes on the SCBA bottle
and PASS inventory printouts. The first line was OK, but the remaining
ones were indented too far.
9. Changed all references to "Date of Manufacture" or "Date Made" in the SCBA
bottle inventory and fill log to "Original Hydro" or "Orig. Hydro" to
remove a point of confusion.
10. Changed the way all of the "Last Hydro Date" and "Date Made" (now "Orig.
Hydro") entries are made. You now enter these dates exactly the same way
they are stamped on the bottles; i.e. "mm/yy". You no longer have to
remember to put in a "01" for the day of the month. (I should have done
this one a long time ago.)
11. When adding new bottles into the inventory, the program now checks to
make sure you haven't already entered that particular serial number or
I.D. number. If you have, a pop-up box will inform you which number is
already being used, and then erase the new entry. This only works when
adding new bottles. If you go back in under the "browse/edit" or "search"
features, this duplicate entry chack is not made.
12. When a bottle or PASS unit is erased, it is actually only hidden from
the user, not physically removed from the file. This is because the
actual removal of the record can take many, many seconds. After a
large number of items have been erased, the presence of these hidden
records slows down the look-up and retrieval of information. The
program now monitors how many items have been erased from each database
file. After you have erased the twenty fifth record, the program will
physically remove these hidden records, resulting in a "Please wait,
removing . . . marked for erasure" message. This physical removal occurs
when you leave the respective menu screen, or when you quit the program
for SCBA bottle inventory records. If you use one of the "bulk erase"
selections on the Record Deletion Menu, this physical removal process is
handled immediately, and the "erased" counter reset to zero.
Bacause this is a new feature, you will get the "please wait..." message
the first time you quit any of the menus. This assures you are starting
off with tidy files and gives the counters some place to start.
==============================================================================
Version 1.3 March 22, 1992
----------- --------------
1. Added an inventory function for PASS units. This function works the same
as the SCBA bottle inventory function and will generate a report on
all PASS units not having had a battery replacement within the past
eleven months.
2. Changed the method of providing upgrades to registered users. All
registered users will now receive instructions on performing the upgrades
themselves. This eliminates the inconvenience of them having to send
me a disk or money and allows them to use the new features immediately.
3. References in the FILL LOG to "department" have been changed to "owner"
or "organization." This was done to accomodate industrial users who
utilize the program for their fire brigades, and for those locations
having HazMat teams that are not a part of a Fire Department.
4. Changed some of the menu descriptions to provide a clearer idea of what
they did. Changed the printed report headers so they all look the same.
5. The format of the printout from the "NEEDS HYDRO TEST OR REFILLED" report
has been changed slightly. Previously, both the "LAST FILLED" and "LAST
HYDRO" dates would be printed for each bottle listed, even if only one of
them was out of date. Now, only the date which caused the bottle to be
listed is printed; the other date is shown as OK .
6. On all of the data entry screens, the operation of the "Entry By:" block
has been changed slightly. Previously, you needed to retype the initials
of the person making the entry each time. Now you only type them the
first time. The initials are stored in temporary memory and will "pop up"
on all subsequent entries. This should eliminate a lot of redundant typing.
7. The operation of adding new bottles to the FILL LOG has been changed.
Numerous organizations keep track of their bottles by a short I.D. number,
like "B1", "B2", etc. These users had to refer to an "I.D. Number To
Serial Number" cross reference sheet when making entries.
I am now requiring that your organization's name be programmed to the F1
key. When entering bottles into the FILL LOG, the program detects the
pressing of the F1 key and the data entry screen changes. You no longer
have to enter the Working Pressure, Serial Number, or Last Hydro Test Date.
A new line, "Serial No. or I.D. #:" replaces the current "Serial Number:"
line. You will type either the serial number or I.D. number here. After
completing the rest of the entries, the program will search your SCBA
bottle inventory file for an exact match of what you typed on the new line.
If it finds one, the "Working Pressure:", "Serial Number:", and "Last Hydro
Test Date:" will be automatically entered into the FILL LOG. After
verifying that the information is correct, you will press any key except
Esc to accept the information and proceed to the next entry. Pressing Esc
will erase that entry. If an exact match cannot be found, you will be
given the option of entering those three items manually.
It sounds more difficult than it really is, but this "short cut" saves a
lot of typing and eliminates the possibility of an inventory entry not
getting updated because the wrong serial number was typed in.
Also, you will not get the "Please wait, updating inventory...' message
now unless you have actually added one of your bottles to the fill log.
8. Improved the operation of the program in detecting errors in the index
files. Because these files are so critical to finding the information,
and because they can be "corrupted" if the program terminates "abnormally"
(as in a power failure or a Ctr-Alt-Del), the program now monitors how it
terminates. If the program terminates in any way other than by using the
Esc key from the main menu or by selecting the QUIT function on the main
menu, all of the index files will be rebuilt the next time the program is
used.
9. The copy to/from floppy disk functions have been enhanced. If there is a
problem with the floppy drive or disk, the nature of it will be spelled out
instead of just saying "floppy drive not ready."
==============================================================================
Version 1.21 January 10, 1992
------------ ----------------
1. Added the ability to search for bottles in the inventory by the I.D.
number as well as the serial number.
2. Added a "confirm you want to quit" pop-up box when quitting the program
by using the Esc key instead of "Q." Just press the Esc key again, the Y
key, or the Enter key to actually quit.
==============================================================================
Version 1.2 December 6, 1991
----------- ----------------
NOTE: The enhancements in this version change required a modification of the
basic structure of the data files. All registered users upgrading from
version 1.1x received (or will receive) a program which converts their
old data files automatically.
1. The "initials" blocks have been expanded from three to six characters.
2. Added the file FILL_LOG.FRM to the package. This is an ASCII file which
can be used to log your bottle fills. Several people told me they didn't
want to try the program because they didn't want to have to make up
another form.
3. Corrected several minor display errors and misalignments, as well as one
obscure instance of the program looking for a non-existent index file.
4. Greatly enhanced the error-handling routines, particularly during
floppy disk transfers. Any "unexpected" errors will now be written to
your disk drive under the file name CLIP?.ERR. This will help isolate
reported problems.
5. The ESC key can now be used to back up out of any menu.
6. The creation of backup files during a "restore from floppy" is now
optional, via a pop-up dialog box.
7. The SCBA Inventory Reports menu has a new selection which will report on
bottles needing a hydro test, without regard to or displaying/printing
their "last filled" date.
8. A new column has been added to the "browse" and "search" listings.
This column was added just to the left of the "STORED ON:" column.
It is titled "NOTES?" and shows you how many lines of notes are present
for that bottle. The "STORED ON:" column is now off the screen to the
right and can be seen using the "right arrow" cursor key. The inventory
"browse" and "search" screens now show you how many lines of notes
(if any) had been previously entered.
9. The operation of the FILL LOG summary report has been changed. The
report now displays on the screen first, with printing it an option.
10. Changed the printouts so the totals at the bottom of the last page are
now centered on the page.
11. Added the "/BW" command line switch to enhance the readability of the
display when used on monochrome monitors.
==============================================================================
Version 1.11 September 22, 1991
------------ ------------------
1. Added the "/NS" command line switch to enable "no snow" on older CGA
monitors.
2. Added a routine at program start up to check for existence of index files.
It will only reindex now if one or more of the files are missing.
==============================================================================
Version 1.0 July 22, 1991
----------- -------------
1. Initial release provided only to a few local fire departments for testing
and suggestions on improvements.